SERIES 200SM PELTIER ELEMENT
Cooler dryers remove water vapour from Stack and Exhaust Emission
gases, before analysis by ambient analysers. Available in 1, 2 or
3 channels with peristaltic drain pumps and alarm monitoring for each.
MODEL 340 DISTRIBUTION
Delivers hot, filtered sample
gas at regulated pressure throughout the gas analysis system.
The Model 340 comprises a temperature controlled oven assembly, housing
a particulate filter and metered manifold. Filter removal and individual
flow adjustment of three outlet channels is easily achieved via the
front panel. Sample gas pressure is displayed on the front panel and
a thermocouple socket on the rear panel allows sample temperature
to be monitored remotely.
GAS SAMPLE TUBING
SIGNAL TRACE HEATED LINE
Designed to convey hot exhaust gases from sample points and probes
to gas analyzer, without compromising sample integrity. With safety
a major consideration the tough, flexible line is electrically isolated
from the main supply and is thermally insulated to allow handling
even at full temperature.
Single tube design in 1/4" & 3/8" tube dia. and lengths
AND MULTIPOINT SAMPLER
SERIES 300 / 352 PREFILTER
units are designed so that sample gas can be selected from various
points for individual cylinder measurements or other multipoint selection
reasons such as engine cell selection. The unit is normally mounted
upstream of the inlet to the 350 Series Prefilter unit. A heated oven
(191 °C) is fitted with a manifold of air actuated ball valves
each of which can deal with dirty test samples without prior filtration.
The oven is fitted with wiring and temperature controller to a 19
rack mounted enclosure and has either 4, 6, 8 or 10 selectable gas
sample inlets. Shown here mounted on an optional trolley.
SERIES 330 HEATED PREFILTER
19" Rack-mounting, temperature controlled gas sampling prefilter
for hot/wet analysis systems. Configured with up to three temperature
controllers for heat traced system tubing jumpers and sample tubing
PORTABLE HEATED PRE-FILTER
SERIES 320 PORTABLE PREFILTER
Field portable version heated prefilter featuring ruggedized construction
with lifting eyelets and military style circular multi-pin electrical
connectors. For stack testing and field monitoring.
We supply a variety of gas sampling accessories for various applications.
These can be Heated or Insulated. Probe material include Stainless Steel,
Monel, Hastaloy and ceramic. Air back-purging and calibration gas inlets
are available as well as mounting configurations and environmental enclosure
sales representatives in all regions of the U.S. should contact us.