Microprocessor Control

Advanced Gas Analyzers

2-Year Warranty


Model 3000HM and 3010P Hydrocarbon Analyzers.
More standard features, better design, longer warranty, better service support and safer operation than any heated total hydrocarbon analyzer manufactured anywhere. CE marked and suitable for compliance monitoring per 40 CFR part 60 method 25A and part 503 applications. View the CEN 12619 Report and MCERTS for these analyzers.

gas analyzers
Series III



Heated Total Hydrocarbon Analyzer Model 3000HM

The Signal Instruments model 3000HM is a superior new totally-heated FID-based hydrocarbon analyzer. It has been designed from the ground up to be accurate, reliable and easily maintained. In operation, the instrument is safe, simple, quiet and highly stable. The 3000HM features a catalytic internal air supply and requires no external sources of zero gas or detector combustion air, sets up quickly and is designed for minimal power consumption.

The hydrocarbon analyzer has a totally automatic microprocessor-based operation including: auto-ignition, auto-calibration, auto-range with ID and auto-purge on shutdown. This makes the instrument ideal as a "smart" stand-alone unit or as a "building block" for systems integration via a RS-232 communications port. Automatic diagnostics and fully-configurable alarms are also integral to the hydrocarbon analyzer.
A large multifunction, backlit LCD provides a clear display of hydrocarbon concentration measurement, range, sample flowrate and the status of critical operating parameters (oven, catalyst and flame temperatures, fuel, air and sample pressures, DC and bias power supplies). The intuitive, menu-driven interface and soft key buttons enable the operator to quickly configure and control the monitor's function. The unit features 19" rack mounting at 3 RU height and a weight of only 35 Lb. It has a dual voltage capability of 115 VAC and 230 VAC, selectable from the rear panel. CE marked.

Download the 3000HM Operating Manual (Adobe PDF format 1.08 Mb)


Portable Heated Total Hydrocarbon Analyzer Model 3010 MiniFID

A 5 meter or 10 meter heat-traced sample line is included with the 3010P. Please specify the length when placing your order.

The model 3010P is a self-contained, portable heated total hydrocarbon analyzer with a built-in heated sample line controller and detachable bottle rack for fuel and calibration gas cylinders. Standard connections allow the use of full-sized gas cylinders for use in temporary continuous or extended operation. The 3010P uses the same sample-handling and heated flame ionization detection components as the microprocessor-powered 3000HM Hydrocarbon Analyzer.

Download the 3010 MiniFID Operating Manual (Adobe PDF format 211 Kb)






Hydrocarbon analyzers for special applications are available

e-mail us for more information

Site Map




355 North York Rd.
Willow Grove, PA 19090
Tel: 215.830.8882
Fax: 215.830.8922
email: sales@k2bw.com
Hours of operation:
M-F 8AM to 6PM
weekends and 24-hour emergercy service by agreement
© 1996-2013 K2BW All Rights Reserved